Drying assistance
To achieve better drying results, the dishwasher door will automati-
cally open a few centimeters wide at the end of the program.
This function cannot be activated for all programs (see "Program
chart").
Drying assistance can still be activated or deactivated for the se-
lected program even if it the function is permanently enabled or dis-
abled in "Settings , Drying".
This single setting only applies to the selected program and will no
longer be used after the program has finished.
Turn the dishwasher on using the button.
Select the desired program (see "Operation, Selecting a program").
The LED for the Start/Stop button will flash.
Press the OK button.
If Delay Start is enabled in "Settings , Delay start", the following
selection menu will appear in the display:
Selection
Delay start
Drying assistance
Drying assistance
Select
ton.
If Delay Start is disabled in "Settings , Delay start", the following
drying assistance options will be shown directly:
Drying
No
Yes
(
–
No
Drying assistance is deactivated for the selected program.
Yes
–
Drying assistance is activated for the selected program.
The setting opposite of the one configured in "Settings , Drying"
will be marked in the display.
You can apply this setting by pressing the OK button.
Additional functions
and confirm your choice with the OK but-
59