Miele PG 8061 Operating Instructions Manual page 23

Water
connections
Commissioning
completed
The display will then change to the screen for setting the water con-
nection.
This setting can be disabled if it is not possible to connect the dish-
washer to all available water connections.
If individual water connections are disabled, they can only be en-
abled again by Miele Service.
Plumbing connections
Accept
Cold water
9
Use the  and  arrow buttons to select the water connections

which are not in use, and confirm your choice with the OK button.
The checkmark  will be removed from the box  and the water
connection is then disabled.
Select Accept to save your choice, and confirm your setting with

the OK button.
Commissioning is successfully completed and the following message
will appear in the display.
Set up successful
Press the OK button.

M
The dishwasher is now ready for use.
PROFESSIONAL
PG 8061
The start screen is displayed for 3 seconds.
Then the first shortcut button program will appear in the display.
Commissioning
;
,

OK
23