Drying - Vented; Cycle-Time Display; Or Non-Vented - Miele G 595 SC Operating Instructions Manual

Additional Functions
1. Water Inlet — lengthens fill time
to compensate for low water
pressure.
© Tum off dishwasher by pushing
"On-Off" button to "Off" position.
e Press "Short", "Non-heated
drying" button, and push "On-Off"
button to "On", all at the same time.
The letter "P" will display.
© Press "Intensive +" button and unit
will display "10° or 11"
07 (high water pressure)
1" (low water pressure) — in-
creases water level
© Press "Non-heated drying" button
and "10" changes to "11" or the
other way around.
® Press "1-9 hrs" button. Unit dis-
plays "SP".
€ Press "1-9 hrs" button again. The
selection is now stored in me-
mory.
2. Drying - vented or non-vented.
© Turn off dishwasher by pushing
"On-Off" button to "Off" position.
O Pross "Shot", —"Non-heated
drying" button and push "On-Off"
button to "On" position, all at the
same time. The "P" will display.
© Press "Intensive" button. The unit
displays "20" or "21"
"20" - regular, vented dry.
convection, non-vented dry.
NOTE: Generally #20 dries more tho-
roughly. Please use liquid "Blue Jet
Dry", page 11
28
© Press "Non-heated drying" button
and "20" becomes "21" or the
other way around.
© Press "1-9 hrs" button, Unit dis.
plays "SP".
€ Press "1-9 hrs" button again. The
selection is now stored in me-
mory.
3. Cycle-time Display
The dishwasher has been pro-
grammed at the factory for hot water
connection. If a cold connection is in
effect, the cycle time will be much
longer.
e To change the cycle from hot to
cold, do the following:
e Turn off dishwasher by pushing
"On-Off" button to "Off" position
© Press "Shot", —"Non-heated
drying" button and push "On-Off"
button to "On" position. all at the
same time. The "P" will display.
€ Press "Normal". The timer displays
740" (hot water connection).
€ Press "Non-heated drying" button
and the timer will display "41"
(cold water connection).
0 Press "1-9 hrs" button. The timer
displays "SP"
€ Press "1-9 hrs" button once more.
The selection is now stored in
memory.