Mounting The Lens - Sanyo VCC-5775P Instruction Manual

MOUNTING THE LENS

L
1
C mount
2
type lens
3
2
CS mount
type lens
7
English
Please use a DC type auto-iris lens (sold separately).
Checking the lens mount
Do not use lense with a length L more than 5 mm. If not, that may
damage the camera and prevent proper installation.
1
Remove the lens mount cap from the camera.
2
Install the auto-iris lens.
CS mount type lens
Carefully align the lens mount with the camera opening, then turn the lens
slowly to install it.
C mount type lens
Install the supplied C-mount adaptor on the lens mount, then carefully
align the lens mount with the camera opening and turn the lens slowly to
install it.
3
Connect the lens plug to the lens iris output connector (LENS) on
the side of the camera.
The plug shape may not correspond to the terminal on the camera. In such
a case, remove the original plug and using a soldering iron, connect the
supplied lens iris plug according to the diagram. (Refer to page 8.)