Table of Contents
Advertisement
ADJUSTMENTS
MANUAL setting adjustment
1
Press the CURSOR (j or l) button to select the WRITE PROTECT function setting, then press the
CURSOR (d or c) button to select OFF, then press the SET button.
2
Set the WB switches to the MANUAL mode (both switches 7 and 8 to OFF).
The on-screen setting for WHITE BALANCE will automatically switch to MANUAL. Press the CURSOR
(j or l) button to select the on-screen MANUAL setting (get it flashing), then press the SET button.
The adjustment sub-menu "ADJUSTMENT FOR WB" will be displayed.
3
Press the CURSOR (d or c) button to adjust the R (red) gain. The on-screen marker (b) will move and
the adjustment value will flash according to the red gain setting.
When finished setting the red gain, press the CURSOR (l) button to select B (blue).
Press the CURSOR (d or c) button to adjust the B (blue) gain. The on-screen marker (b) will move and
the adjustment value will flash according to the blue gain setting.
Note: When an adjustment is made, the PRESET setting will automatically switch to OFF. To return to the
initial values, just return the PRESET setting to ON, then press the SET button.
4
When finished. (Refer to step 4 on page 16.)
23
English
WB
CURSOR
SET
7
8
MENU FOR ADJUSTMENT
SYNC
INT
IRIS
AI
BLC
OFF
WHITE BALANCE
MANUAL
AGC
ON
ADJUSTMENT FOR WB
(GAIN)
R
o------z------p 86
B
o------z------p 72
PRESET
OFF
END
MENU
Advertisement
Table of Contents
