Table of Contents
Advertisement
Quick Links
INSTRUCTION MANUAL
Color CCD Camera
VDC-DP7584/VDC-DP7585P
Please read this manual before installing and using this camera, and always
follow the instructions in it for proper use. Be sure to keep it handy for later
reference.
• Refer to the supplied CD-ROM for the French, Spanish, German and Chinese
"INSTRUCTION MANUAL".
To view the INSTRUCTION MANUAL contained in the supplied CD-ROM, you
®
®
need Adobe
Reader
application. If your PC has not been installed with it, you
can download it for installation from the following web site at Adobe Systems
Incorporated.
http://www.adobe.com
• Consultez le CD-ROM fourni pour le « MANUEL D'INSTRUCTIONS » en
français, espagnol, allemand et en chinois.
Pour visualiser le MANUEL D'INSTRUCTIONS contenu dans le CD-ROM
®
fourni, l'application Adobe
Reader
été installé sans cette application, vous pouvez la télécharger depuis le site
Web suivant d'Adobe Systems Incorporated.
http://www.adobe.com
®
vous est nécessaire. Si votre ordinateur a
VCC-P7574/VCC-P7575P
• Hacer referencia al CD-ROM que se suministra para consultar el "MANUAL DE
INSTRUCCIONES" en francés, español, alemán y chino.
Para ver el MANUAL DE INSTRUCCIONES contenido en el CD-ROM
suministrado, es necesario disponer de la aplicación Adobe
no tiene instalada esta aplicación, es posible descargarla para la instalación en
el siguiente sitio web en Adobe Systems Incorporated.
http://www.adobe.com
• Die "BEDIENUNGSANLEITUNG" in den Sprachen Französich, Spanisch,
Deutsch und Chinesisch finden Sie auf der mitgelieferten CD-ROM.
Zum Öffnen der BEDIENUNGSANLEITUNG auf der mitgelieferten CD-ROM
benötigen Sie das Programm Adobe
auf Ihrem PC installiert ist, können Sie das Programm unter der nachstehend
angegebenen Internet-Adresse bei Adobe Systems Incorporated zur
Installation herunterladen:
http://www.adobe.com
• 请参阅随附的光盘以了解法语、西班牙语、德语和中文 "说明手册" 。
要查看随附光盘中包含的说明手册，您需要安装有 Adobe
如果您的 PC 上没有安装此应用程序，则您可以从 Adobe Systems Incorporated 的
以下网站下载并进行安装。
http://www.adobe.com
VDC-DP7584
VDC-DP7585P
VCC-P7574
VCC-P7575P
®
®
Reader
. Si el PC
®
®
Reader
. Falls diese Anwendung nicht
应用程序。
®
®
Reader
Advertisement
Table of Contents
Related Manuals for Sanyo VCC-P7575PA
Summary of Contents for Sanyo VCC-P7575PA
-
Page 1: Instruction Manual
INSTRUCTION MANUAL Color CCD Camera VDC-DP7584/VDC-DP7585P Please read this manual before installing and using this camera, and always follow the instructions in it for proper use. Be sure to keep it handy for later reference. • Refer to the supplied CD-ROM for the French, Spanish, German and Chinese “INSTRUCTION MANUAL”. -
Page 2: Table Of Contents
Contents ☞The contents in angle brackets <> are the menu screen title. Precautions ..........Information . -
Page 3: Precautions
■ Do not open or modify Do not open the cabinet, as it may be dangerous and cause damage to the unit. For repairs, consult your dealer or an Authorized Sanyo Service Center. ■ Do not put objects inside the unit Make sure that no metal objects or flammable substance get inside the unit. -
Page 4: Information
Information ■ Characteristics • Equipped with motorized zoom pan focus auto iris lens. Thanks to its large depth of field, focused images can be obtained in a wider range of scene without intentional focusing. • Partial masking can be applied for any part of an image you want to hide. -
Page 5: Useful Operations
DAY/NIGHT function using external switch, etc.: R DAY/NIGHT (See page 23) WEEE Symbol Information Please note: Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. -
Page 6: Accessing The Main Menu
Accessing the Main Menu You can configure various adjustments and preference settings on the monitor screen. ☞In this manual, the buttons and their names on the camera are used for description. ■ Using the buttons on the base circuit board Open the dome cover. -
Page 7: An Example For Basic Operation For Settings And Adjustments
Indicates to press the Select button up and down to select an item. An Example for Basic Operation for Settings and Adjustments Selecting item. Main Menu ·SYNC IRIS WHITE BALANCE AGC GAIN NORM GAMMA 0.45 SHUTTER APERTURE HIGH DAY/NIGHT AUTO y OPTION PRESET Press and hold... - Page 8 Accessing the Main Menu Closing the setting screen. Once the settings are complete, set “MENU” to “END” and press the SET button. PRESET ·MENU ·MENU • If you press the SET button while “BACK” is selected, the previous screen will reappear. ■...
-
Page 9: Selecting Display Language
Selecting Display Language <LANGUAGE> You can change the language displayed on the settings and adjusting screens. (Default setting: ENGLISH) SYNC IRIS WHITE BALANCE AGC GAIN NORM GAMMA 0.45 SHUTTER APERTURE HIGH DAY/NIGHT AUTO y ·OPTION PRESET ·OPTION MENU (SET) Select a language and press the SET button. VDC-DP7584/VCC-P7574 LANGUAGE LANGUAGE... -
Page 10: Naming Cameras
Naming Cameras <TITLE> You can give a name (title) to each camera. The specified names are displayed on the monitor so that you can easily distinguish the monitoring images when you use multiple cameras. SYNC IRIS WHITE BALANCE AGC GAIN NORM GAMMA 0.45... - Page 11 Repeat step to complete the name and select “ID”. Example: ROOM1 TITLE SETTING ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 :-v ROOM1??????????? ·ID ·ID • The letters “???...” do not appear on the monitoring screen, but if you select “ON” for the “TITLE” and then enter no letter at all, the monitor will show you “???...”.
-
Page 12: Password Lock Setting/Cancelling
Password Lock Setting/Cancelling <PASSWORD> You can lock the accessing the Main menu by specifying a password. You will be prompted to enter the password to access the Main menu. SYNC IRIS WHITE BALANCE AGC GAIN NORM GAMMA 0.45 SHUTTER APERTURE HIGH DAY/NIGHT AUTO y... - Page 13 Select “PASSWORD CHANGE” and press the SET button. PASSWORD PASSWORD LOCK ·PASSWORD CHANGE SET y ·PASSWORD CHANGE RThe <NOW PASSWORD> “????” screen appears. Enter the current password and press the SET button. PASSWORD <NOW PASSWORD> · 1234 RThe <NEW PASSWORD> “????” screen appears. Password Lock Setting/Cancelling <PASSWORD>...
-
Page 14: Adjusting Synchronization Error
Adjusting Synchronization Error <SYNC> By default, the synchronization adjustment for the camera is performed internally (INT). However, you must make adjustments in the Line Lock (L-L) Setting screen, if the monitor screen seems out of sync after switching over among multiple cameras using AC 24 V. -
Page 15: Backlight Compensation
Backlight Compensation <BLC> If the images of subjects are not clear because of backlight, correct it by adjusting conditions or changing correction method. Select “BLC” and specify a correction method. SYNC ·BLC IRIS WHITE BALANCE AGC GAIN GAMMA SHUTTER APERTURE DAY/NIGHT OPTION ·BLC... -
Page 16: Adjusting Iris Level
Adjusting Iris Level <IRIS> If you need to adjust the brightness follow the steps below. SYNC ·IRIS WHITE BALANCE AGC GAIN NORM GAMMA 0.45 SHUTTER APERTURE HIGH DAY/NIGHT AUTO y OPTION PRESET ·IRIS MENU (SET) Adjust the brightness (iris) (0 – 100). IRIS SETTING <LEVEL>... -
Page 17: Adjusting White Balance
Adjusting White Balance <WHITE BALANCE> With its default Auto-tracing White Balance (ATW) setting, this unit is able to obtain natural colors even when the light source is changed. However, you may manually change the white balance settings or its mode to obtain better tone, especially when the screen color does not match actual objects. -
Page 18: Awc Setting (One-Push Adjustment)
Adjusting White Balance <WHITE BALANCE> AWC SETTING (One-Push Adjustment) Select “AWC LOCK” – “SET”. AWC SETTING ·AWC LOCK GO TO MWB ·AWC LOCK (SET) Point a camera to a white paper or wall to project an image on the whole screen, and press the SET button. -
Page 19: Mwb Setting (Manual White Balance)
MWB SETTING (Manual White Balance) Select “R” or “B” to adjust tint (0 – 255). MWB SETTING · R PRESET MENU R : Adjusting Red B : Adjusting Blue • The greater the number, the deeper the tint becomes. Adjusting White Balance <WHITE BALANCE> Set “MENU”... -
Page 20: Setting Gain Value
Setting Gain Value <AGC GAIN> If you need to adjust the sensitivity in dark places (AGC*), follow steps below. Select “AGC GAIN” and specify a mode. SYNC IRIS WHITE BALANCE ·AGC GAIN GAMMA SHUTTER APERTURE DAY/NIGHT OPTION ·AGC GAIN PRESET MENU Set “MENU”... -
Page 21: Correcting Gamma Characteristic
Correcting Gamma Characteristic <GAMMA> Change the mode for Gamma correction*. Select “GAMMA” and specify a mode. SYNC IRIS WHITE BALANCE AGC GAIN ·GAMMA SHUTTER APERTURE DAY/NIGHT OPTION ·GAMMA PRESET MENU Set “MENU” to “END” and press the SET button. RFinishes the setting screen and returns to the normal monitoring screen. -
Page 22: Specifying Shutter Speed
Specifying Shutter Speed <SHUTTER> You can specify the electronic shutter speed to capture fast-moving subjects. Note: With the increase in shutter speed number, faster movement can be captured, though the image becomes darker. Select “SHUTTER” and specify a shutter speed. SYNC IRIS WHITE BALANCE... -
Page 23: Accentuating Subject Outline
Accentuating Subject Outline <APERTURE> By specifying the APERTURE* setting, you can accentuate the outline of the subject when its image is blurred and unidentifiable. Select “APERTURE” and specify a mode. SYNC IRIS WHITE BALANCE AGC GAIN GAMMA SHUTTER ·APERTURE DAY/NIGHT OPTION ·APERTURE PRESET... -
Page 24: (Vdc-Dp7584/Vdc-Dp7585P)
Adjusting DAY/NIGHT Function <DAY/NIGHT> (VDC-DP7584/ VDC-DP7585P) The DAY/NIGHT function automatically switches over between COLOR and B/W mode depending on the ambient brightness; for example, choosing COLOR mode during daytime, and B/W mode for nighttime monitoring with its increased sensitivity in a darker environment. “AUTO” is preselected by default, which provides an automatic switch feature to detect the ambient darkness. -
Page 25: Day/Night Setting-Auto
DAY/NIGHT SETTING-AUTO Select “LEVEL” and specify a level for DAY/ NIGHT switching. DAY/NIGHT SETTING ·LEVEL BURST ·LEVEL LOW : Switches in darker conditions; i.e., color shot is preferred so that it does not switch from COLOR to B/W until it gets dark. -
Page 26: Day/Night Setting-B/W (Black-And-White)
(VDC-DP7584/VDC-DP7585P) Adjusting DAY/NIGHT Function <DAY/NIGHT> DAY/NIGHT SETTING-B/W (Black-and-white) Set “BURST” to “ON” or “OFF” for the burst signal*. DAY/NIGHT SETTING ·BURST ·BURST PRESET MENU : This is effective if you observe any disturbance of picture caused by switching from color to black-and-white mode of a monitor, in particular when peripheral devices such as a switcher unit are connected. -
Page 27: Hiding Partial Image
Hiding Partial Image <PRIVACY MASK> If privacy protection is required for any shot, apply the masking feature for any position to be prevented from being presented. SYNC IRIS WHITE BALANCE AGC GAIN NORM GAMMA 0.45 SHUTTER APERTURE HIGH DAY/NIGHT AUTO y ·OPTION ·OPTION PRESET... - Page 28 Hiding Partial Image <PRIVACY MASK> Privacy Masking Setting (continued) Specify the masking size and press the SET button. SIZE • From the datum point at the upper left corner of the area, the size can be scaled up or down, as well as side to side. RReturns to the “MASK NO.SELECT”...
-
Page 29: Specifying Alarm Input
Specifying Alarm Input <ALARM> If you have connected an external door switch or an infrared sensor, specify the following settings. This unit has a built-in motion sensor, which outputs alarm signals when any moving subject, such as a would be intruder, is detected. SYNC IRIS WHITE BALANCE... -
Page 30: Motion Sensor Setting
Specifying Alarm Input <ALARM> Motion Sensor Setting Select “MOTION” and specify “ON”. ALARM SETTING ALARM IN ·MOTION uAREA uSENSITIVITY ZOOM uZOOM TIME ·MOTION DURATION ALARM SIGN ON : Detects when the motion sensor responded. OFF : The motion sensor is unused. Select “uAREA”... - Page 31 Motion Sensor Setting (continued) Select “uSENSITIVITY” and press the SET button. ALARM SETTING ALARM IN MOTION uAREA ·uSENSITIVITY ·uSENSITIVITY ZOOM (SET) uZOOM TIME DURATION ALARM SIGN RThe “SENSITIVITY” screen appears. Select “<MOVE>” and specify a sensitivity level (1 –10). SENSITIVITY <MOVE>...
-
Page 32: Zoom Setting
Specifying Alarm Input <ALARM> ZOOM setting Select “ZOOM” and specify the zoom factor for alarm detection (included motion-detected). ALARM SETTING ALARM IN MOTION uAREA uSENSITIVITY ·ZOOM ·ZOOM uZOOM TIME DURATION ALARM SIGN PRESET MENU • Select from: OFF (no zoom), x1.0, x1.4, x2.0, x2.6 Select “uZOOM TIME”... -
Page 33: Duration Setting
DURATION setting Select “DURATION” and specify the duration for the alarm sign indication (a time until next alarm input becomes enabled). ALARM SETTING ALARM IN MOTION uAREA uSENSITIVITY ZOOM ·DURATION uZOOM TIME ·DURATION ALARM SIGN PRESET MENU • Select from: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M, 5M (S = second, M = minute) Note: You should not specify shorter “DURATION”... -
Page 34: Troubleshooting
Troubleshooting Before seeking repair service, please review the following points first. If the trouble persists, consult your dealer or an Authorized Sanyo Service Center. Symptom Items to Be Checked • Is the coaxial cable connected securely? • Is lighting appropriate? •... -
Page 35: Specifications
Specifications VDC-DP7584/VCC-P7574: NTSC standard 525 lines, 60 fields/sec. Scanning system VDC-DP7585P/VCC-P7575P: PAL standard 625 lines, 50 fields/sec. Image sensor 1/4" interline transfer method CCD VDC-DP7584/VCC-P7574: 768 (H) x 494 (V) Number of effective pixels VDC-DP7585P/VCC-P7575P: 752(H) x 582(V) Horizontal resolution More than 520 TV lines VDC-DP7584/VDC-DP7585P: Gain high: 0.06 lx (F 1.9, B/W mode), 1.2 lx (F1.9, color... -
Page 36: Screen Sequence
ZOOM uZOOM TIME DURATION SENSITIVITY ALARM SIGN <MOVE> · LANGUAGE <TIME> ·LANGUAGE ENGLISH LANGUE FRENCH TEST IDIOMA SPANISH OFF/X1.0/X1.4/X2.0/X2.6 5S/10S/15S/20S/30S/1M/2M/3M/4M/5M LANGUAGE 5S/10S/15S/20S/30S/1M/2M/3M/4M/5M ·LANGUAGE ENGLISH LANGUE FRENCH OFF/ON SPRACHE GERMAN SANYO Electric Co., Ltd. Pri nt ed in Japan...