Preferential Memory Scan - Yaesu FTM-3100R Advanced Manual

Scanning

Preferential Memory Scan

The FTM-3100R also allows setting up a "Preferential Scan List" of channels, which you can
"flag" within the memory system. The flagged channels are designated by an " " icon when
they are selected, one by one, for the Preferential Scan List.
When memory scanning is initiated beginning on a channel with the " " icon appended, only
those channels bearing the " " icon will be scanned. If scanning is initiated on a channel
which does not have the " " icon appended, all channels including those with the " " icon
appended will be scanned.
Here is the procedure for setting up and using the Preferential Scan List:
1. Set the radio to the Memory Recall mode by
pressing the [ V/M ( MW )] key repeatedly, as
necessary, until "
appear on the right side of the display.
2. Rotate the DIAL knob to select the Memory
Channel that you wish to add to the prefer-
ential Scan List.
3. Press and hold in the [ MHz ( SETUP )] key for
one second, then rotate the DIAL knob to
select "SCAN SKP 32".
4. Press the [ MHz ( SETUP )] key, and then ro-
tate the DIAL knob to select "SELECT".
5. Press and hold in the [ MHz ( SETUP )] key for
one second to save the new setting and exit
to normal operation.
To initiate Preferential Memory Scanning:
1. Set the radio to the Memory Recall mode by pressing the [ V/M ( MW )] key repeatedly, if
necessary.
2. Rotate the DIAL knob to select any memory
channel which has an " " icon appended to
the channel number.
3. Press and hold in either the microphone [ UP ] or [ DWN ] button for one second to initiate
Preferential Memory Scanning. Only the channels which have a " " icon appended to
the channel number will be scanned.
18
" and a channel number VOL
REV M H z
SQL
TXPO
D W
SETUP
VOL
REV M H z
SQL TXPO
D W
SETUP
FTM-3100R Advance Manual
DIAL
V / M
M W
DIAL
V / M
M W