Clearing A Waypoint - Magellan NAV 5000 User Manual

Waypoint "start" can, however, be copied. Retrieve the waypoint and
rename it as described above. The unit copies the position data from
"start" to the new waypoint name. "Start" is untouched until a new route
is entered.

Clearing a Waypoint

Use the following key sequence to delete a waypoint from the unit's
memory.
To continue and erase the waypoint, press CLEAR again.
To abort and keep the waypoint, press any function key.
To clear all waypoints, use AUX 10.
Locate and retrieve the
waypoint, as described in
"Viewing a Waypoint." Press
CLEAR. The display shows
the message illustrated.
4-48