Advertisement
ProMARK X
Press the DOWN ARROW again to
see the SQ and PDOP of the fix.
If a waypoint was entered manu-
ally, no values will be displayed for
satellite signal quality and geomet-
ric quality.
Renaming Waypoints. To rename a waypoint, retrieve it as described in
Viewing a Waypoint. From any of the waypoint message displays, press
ENTER. Enter the new name, and press ENTER again.
An averaged waypoint is also renamed in this way. When you start to enter
the new name, however, the
character.
Waypoint stxx, waypoint AVG, and waypoint
They can, however, be copied. Retrieve the waypoint and rename it as
described above. (When renaming an averaged waypoint,
first character.) The unit copies the position data to the new waypoint name.
Waypoints that are assigned to a route cannot be renamed.
Clearing a Waypoint. Use the following key sequence to delete a waypoint
from the unit's memory.
Display the waypoint as described
in Viewing a Waypoint. Press
CLEAR.
The unit displays a message asking if you really want to clear the displayed
waypoint. If you do, press CLEAR again.
To abort and keep the waypoint, press any function key.
Waypoints, Routes & Navigation
MESA
CLIF
will automatically appear as the first
¢
TMP cannot be renamed.
¢
TO CLEAR MESA
PRESS CLEAR
PDOP=4.3
2
1
1
2
0
9
4
5
5
4
PDOP
is kept as the
¢
~!
5-5
Advertisement
Chapters
