Magellan NAV 5000 User Manual page 99

satellites with weak SQs or set temporarily unusable by the GPS
o
system operators.
the current status of every satellite in the system.
o
The satellite status display includes one of the following messages:
ON:
TEMP OFF:
OFF:
Satellites that are listed in the Almanac as being unhealthy by the GPS system
operators are not listed in Sat Status. Satellites are identified
by a pseudorange number (PRN), which is used by the government to identity
the satellites.
the satellite is operating and is healthy.
the unit is temporarily ignoring this satellite.
Usually a satellite is being ignored because,
after three tries, the unit was unable to find it.
This happens when a satellite is hidden from
view by buildings or other large obstacles. The satellite
will be temporarily off until the unit is
turned off and back on, or until the satellite is located by
the fifth channel.
the unit has been instructed to ignore this
satellite by the user, perhaps because its SQ
is very low. The satellite remains off until it is reset.
5-4
Press AUX, 3, and ENTER
(or press AUX once and the
RIGHT ARROW three
ti mes) to reach the Sat
Status display. The first
display is the message
POS.
You can analyze your
current position or press
the RIGHT ARROW to
analyze a waypoint.