Setting The Audio Path; Setting Contact Names To Display During Calls - Avaya 9608 Using Manual

Procedure
1. Press Home.
2. Press Select to select Options & Settings > Call Settings > Visual Alerting.
3. Press Change to select On or Off.
4. Press Save.

Setting the audio path

You can set your phone to go off-hook on the Speaker or the Headset when you make an on-hook
call.
Procedure
1. Press Home.
2. Press Select to select Options & Setting > Call Settings > Audio Path.
3. Press Change to select Headset or Speaker.
4. Press Save.

Setting contact names to display during calls

You can set your deskphone to display the contact's name rather than the calling party name for an
incoming or answered call, a transferred call, or conference call when a calling or called party
number matches a number on your Contacts list.
Procedure
1. Press Home.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Pair Contacts to Calls.
7. Press Change or OK to change the setting to On or Off.
8. Press Save.
May 2015 Using Avaya 9608/9608G/9611G IP Deskphones H.323
Comments on this document? infodev@avaya.com
Call Settings
47