Basic Scan To Pc Operation; Scan To Pc Using The Adf - Konica Minolta magicolor 2590MF User Manual

Basic Scan to PC Operation

In order to perform this operation, make sure the TWAIN scanner
driver, the printer driver, and LinkMagic (Winidows only) have been
installed to your PC.
When you operate Scan to PC, make sure whether LinkMagic is acti-
vated or LinkMagic icon is displayed on notification area.

Scan to PC using the ADF

If the ADF is used, original documents containing multiple pages can be auto-
matically scanned.
Do not load original documents that are bound together, for example,
with paper clips or staples.
Do not load more than 50 sheets; otherwise an original document mis-
feed or damage to the document or machine may occur.
If the original document is not loaded correctly, it may not be fed in
straight, or an original document misfeed or damage to the document
may occur.
Do not open the ADF cover while documents loaded into the ADF are
being scanned.
1
Press the Scan key to enter Scan mode.
2
Press + or , to select SCAN TO PC.
3
Make sure that there is no document on the original glass.
4
Stack the document in the ADF document feed tray face up with the first
page to be sent on the top of the stack.
5
Adjust the document guides to the document size.
6
Press the Start key.
Scanning starts, and then the scan data is saved to the specified folder.
If the specified folder is not created first, the location to save scanned
document is specified in "\My Documents\KONICAMINOLTA Link-
Magic for magicolor 2590MF\My Data" folder.
For details of saving and scanning the type of the document, refer to
the magicolor 2590MF Reference Guide on the Drivers and Documen-
tation CD-ROM.
122
Downloaded From ManualsPrinter.com Manuals
Basic Scan to PC Operation