Service Option; Enabling Service Access - Honeywell LYNX Touch 7000 Owner's Manual

The Service option allows you to enable and disable the use of a service passcode
which will allow a service person to access your security system to view the event log,
verify trouble conditions, and effect repairs without your having to reveal your
passcode. Until you enable this option, the service technician cannot gain access to
the system.
What You Do
Press
and use the arrow
keys
Press
Enter passcode
Press
Press
NOTE: Upon completion of the service call, repeat the procedure to disable the
Service Passcode.
What You See
5– ALLOW PROGRAM
6– SERVICE
ENTER PASSCODE
SERVICE PASSCODE
DISABLED
SERVICE PASSCODE
ENABLED
ENTER PASSCODE
47

Enabling Service Access

What Happens
The Options menu displays.
M6979A
The system prompts you to
enter your passcode (unless it
was already entered within the
M6949
last 30 seconds). Only a Master
passcode can authorize.
Current service mode status
displays.
M6980
New service mode displays.
M6981
System returns to current mode.
M6949

Service Option

74-2760—1