Standard Operation; Overview - Honeywell LYNX Touch 7000 Owner's Manual

STANDARD OPERATION

Overview

The Honeywell 7000 can have either standard or custom operation. The purpose of
this section is to explain how to use your system when you have chosen to use
standard pre-programmed modes. This section covers how to arm and disarm your
system and put your system in ON WATCH and SYSTEM TEST modes.
Your system allows you to manage numerous security devices with one control. To
simplify the choices and make your system quick and easy to operate, a group of
pre-programmed commands have been organized into modes. Your system comes
with six pre-programmed Security Modes which are listed below.
For three of the security modes, you will predetermine, at the time of installation,
which interior protection points will be on and which will be off. For example, in the
Home mode described in the following table, you may want interior protection in the
basement on and in the upstairs living area off.
You also have the option to customize your modes. See the Custom Modes section for
more information.
15 74-2760—1