Arming And Disarming By Telephone - Honeywell LYNX Touch 7000 Owner's Manual

Arming and Disarming by Telephone

The system can be armed and disarmed from any local touch tone telephone within
the house or from a remote location.
Arming from a local telephone will automatically select Mode 4 which will normally be
the "NIGHT SLEEP" mode.
What You Do:
Pick up a phone inside your home
and press star "*" three times
Upon hearing that system is
ready:
press
Disarm the System from a Local House Telephone
Disarming disables all standard protection.
What You Do:
Pick up a phone inside your home
and press star "*" three times
Enter passcode number 5.
74-2760—1
Arming System from a Local House Telephone
What You Hear:
Welcome:
System is in mode (current number),
enter passcode to disarm.
or, system is ready,
or, system is not ready, try again later,
or, system is in alarm, enter passcode
to disarm,
or, fire alarm, enter passcode to disarm.
System is armed and okay, mode 4, press
pound "#" to exit.
What You Hear:
Welcome:
System is in mode (current number),
enter passcode to disarm.
Disarmed, system is ready, press 1 to arm,
press pound "#" to exit.
30