Removing The Chipset Heat Sink - Packard Bell EasyNote F5 Disassembly Manual

Removing the Chipset Heat Sink

To remove the Chipset heat sink, first remove the Bottom cover (see Removing the Bottom
Cover), then perform the following steps:
1. Unscrew the screws on the Chipset Heat sink and disconnect the fan connector as shown
in Fig. 24
M2x7 Black
Fig. 24 Chipset Heat sink
2. Carefully lift up heat sink from Main Board.
Packard Bell EasyNote F5/F7 Disassembly Manual
Page 18