Removing The Bottom Cover - Packard Bell EasyNote F5 Disassembly Manual

Removing the Bottom Cover

To remove the Top Cover , first remove the battery (see
Optical Disk Drive (see
1. Remove all screws on the bottom of the base unit as shown in Fig. 21
2. Carefully lift up Bottom Cover from base unit.
3. Remove all screw Bottom Shield as shown in Fig. 22 and place it aside.
Removing the Optical Disk
Fig. 21 Bottom Cover
Fig. 22 Bottom Shield
Packard Bell EasyNote F5/F7 Disassembly Manual
Removing the Battery), remove the
Drive) then perform the following steps:
M2.5x7 Black
M2.5x4.5 Black
Page 16