Back Panel - EverFocus ECOR Series Instruction Manual

1.5 BACK PANEL

During initial setup you will be connecting your DVR to multiple input and output devices. This is done
through the back panel.
1
1. Power
Plug the DC 12V power source into the power socket.
2. Alarm In
Connect up to 4 / 8 alarm inputs, selectable between dry contact or TTL/CMOS signal polarity.
3. RS485
Terminal Connector for RS485 control.
4. Alarm Out
N.C or N.O type alarm signal out.
5. Audio Output
Connect a speaker or other audio listening devices to the audio output connection on the back of the digital
video recorder.
6. Audio Input
Connect a microphone or camera audio output to the audio input connection
4 6
2 3
5
8
7
7
10
9 11 12
.