EverFocus ECOR Series Instruction Manual page 44

Set Grid:
Press "Edit" button to start editing motion grid. Use the mouse to drag your desired area. Press "Set All"
button to select the entire area. Press "Clear All" to clear all the grids selected. Press "Save & Back" to
save the motion grid setting and go back to motion setting menu. Press "Cancel" to cancel motion grid
editing. Press "Back" to return to motion setting menu (See Figure 5.7).
Main Monitor: Monitor display options when a motion occurs.
No change: No change on the main monitor display.
Full screen: A full screen of the active camera will display.
Copy: Press "Copy" button to copy the settings to other camera. This will bring up the copy window. Check
the boxes for each camera you wish to copy to, then click "OK" to copy settings. Click "Select All" to choose
all cameras. Click "Cancel" to cancel copy.
Figure 5.7 (Camera Menu – Motion Setting)
38