Optional Equipment; Setup; Loose Parts; Before Operating - Toro 41581 Operator's Manual

Optional Equipment

The Toro Company has optional equipment and accessories that you can purchase separately and install on your sprayer.
Contact an Authorized Service Dealer for a complete list of optional equipment that is currently available for your sprayer.

Setup

Note: Determine the left and right sides of the machine from the normal operating position.
To use the sprayer, you must obtain nozzles. Contact an Authorized Toro Distributor for information on the available boom
kits and accessories. After you install your booms and nozzles and before using the sprayer for the first time, adjust the boom
bypass valves so that the pressure and application rate remains the same for all booms when you turn one or more booms off.
Refer to Adjusting the Boom Bypass valves on page 23.

Loose Parts

Note: Use the chart below to verify that all parts have been shipped.
Description
Key
Operator's Manual
Engine operator's manual
Operator video
Parts catalog
Registration card
Predelivery inspection form

Before Operating

Checking the Engine Oil Level

The engine is shipped with oil in the crankcase; however,
you must check the oil level before you start the engine for
the first time and after you have run it.
1. Position the sprayer on a level surface, set the parking
brake, stop the pump, stop the engine, and remove the
ignition key.
Qty. Use
2 Use in the ignition switch.
1
Read before operating the machine.
1
1 Watch before operating the machine.
1 Use for ordering replacement parts.
1 Complete and return to Toro.
1 Complete and file in your customer history portfolio.
2. Remove the dipstick, located under the passenger seat,
and wipe it with a clean rag (Fig. 2).
1
1. Dipstick
3. Insert the dipstick into the tube and ensure that it is
seated fully.
4. Remove the dipstick and check the oil level.
12
Figure 2