Using The Multichannel Dvd Input; Displaying Source Information - Onkyo TX-SR573 Instruction Manual

Playing Your AV Components
ON STANDBY
V1
1
MULTI CH
MULTI CH
4
CD
7
+ 10
10
- - / - - -
INPUT SELECTOR
MACRO
1
RECEIVER
RECEIVER
TAPE/AMP
TV
DIMMER
+
CH
DISC
ALBUM
-
PREV
CH
DISPLAY
DISPLAY
REC
LISTENING MODE
STEREO
REPEAT
TEST TONE
OPEN/CLOSE VIDEO OFF

Using the Multichannel DVD Input

The multichannel DVD input is for connecting a compo-
nent with a 5.1-channel analog audio output, such as a
DVD-Audio or SACD-capable DVD player, or an
MPEG decoder. See page 23 for hookup information.
Press the [RECEIVER] REMOTE
RECEIVER MODE button, followed by the
[MULTI CH] button.
The MULTI CH indicator appears on
the display.
MULTI CH
5
Audio from the multichannel DVD
input will now be used for the DVD
input source.
Note:
• While the multichannel DVD input is selected, the
Speaker Configuration settings on page 32 are
ignored, and signals from the multichannel DVD input
are fed to the front left, front right, center, surround
left, and surround right speakers, and subwoofer as
they are.
TV
I INPUT
V2 V3
+
2 3
TV CH
DVD
5 6 -
TAPE TUNER
8 9
TV VOL
0 CLEAR
11 12
2 3
REMOTE MODE
DVD CD HDD
VCR CABLE SAT
CDR MD
SLEEP
ENTER VOL
MUTING
PLAYLIST RANDOM
SP A SP B
SURR
AUDIO SUBTITLE PLAY MODE
DIRECT ALLST
CH SEL LEVEL LEVEL
L NIGHT CINE FLTR
RC-632M
MULTI CH indicator

Displaying Source Information

You can display various information about the current
input source as follows.
Press the [RECEIVER] REMOTE
RECEIVER
MODE button, and then press the
[DISPLAY] button repeatedly to
cycle through the available infor-
mation.
DISPLAY
The following information can typically be displayed:
Input source &
volume
Signal format*
or sampling
frequency
Input source &
listening mode
*If the input signal is analog, no format information is
displayed. If the input signal is PCM, the sampling fre-
quency is displayed. If the input signal is digital but not
PCM, the signal format is displayed. Information is dis-
played for about 3 seconds, then the previous display
reappears.
Interpreting Surround Channel Information
A
A: The number of front channels (front left, front right,
and center).
B: The number of surround channels (surround left and
surround right). If there's surround back channel
information, this number will be 3.
C: LFE channel for subwoofer (1 means yes).
B C
35