Speaker Configuration - Onkyo TX-SR573 Instruction Manual

First Time Setup
1
2–8
PREV
CH
DISPLAY
Speaker Configuration
This section explains how to specify
your speaker configuration.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify Large. For those with a
smaller diameter, specify Small.
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
RECEIVER
32
ON STANDBY
TV
INPUT
I
V1 V2 V3
+
1 2 3
TV CH
MULTI CH DVD
-
4 5 6
CD TAPE TUNER
7 8 9
TV VOL
+ 10
0 CLEAR
10 11 12
--/---
INPUT SELECTOR
MACRO
1 2 3
REMOTE MODE
RECEIVER DVD CD HDD
TAPE/AMP
TV VCR CABLE SAT
CDR MD
SLEEP
DIMMER
+
CH
DISC
ENTER VOL
ALBUM
-
MUTING
REC PLAYLIST RANDOM
SP A SP B
LISTENING MODE
STEREO SURR
REPEAT AUDIO SUBTITLE PLAY MODE
DIRECT ALLST
TEST TONE CH SEL LEVEL LEVEL
OPEN/CLOSE VIDEO OFF
L NIGHT CINE FLTR
RC-632M
Cone diameter
2
ENTER
ENTER
3
ENTER
4
1, 9
ENTER
ENTER
5
ENTER
ENTER
Use the Up and Down [
buttons to select "1. Speaker
Config," and then press the
[ENTER] button.
While the "Subwoofer" setting is
selected, use the Left and Right
[ ]/[ ] buttons to select
.
Yes: Select if a subwoofer is con-
nected.
No: Select if no subwoofer is con-
nected.
Use the Down [ ] button to
select "Front," and then use the
Left and Right [ ]/[
select or
Small: Select if the front speakers are
small.
Large: Select if the front speakers are
large.
Note:
• If the Subwoofer setting in step 3 is
set to No, this setting is fixed at Large
and does not appear.
Use the Down [ ] button to
select "Center," and then use the
Left and Right [ ]/[
select , , or
Small: Select if the center speaker is
small.
Large: Select if the center speaker is
large.
None: Select if no center speaker is
connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
]/[ ]
or
] buttons to
.
] buttons to
.