Using The Late Night Function; Using The Cinemafilter; Using The Audio Adjust Settings - Onkyo TX-SR573 Instruction Manual

Using the Listening Modes
RECEIVER
ENTER

Using the Late Night Function

(Dolby Digital only)
With the Late Night function, you can reduce the
dynamic range of Dolby Digital material so that you can
still hear quiet parts even when listening at low volume
levels—ideal for watching movies late at night when you
don't want to disturb anyone.
1 Press the [RECEIVER] REMOTE
MODE button, and then press the
RECEIVER
[L NIGHT] button repeatedly to
select:
L NIGHT
Notes:
• The effect of the Late Night function depends on the
Dolby Digital material that you are playing, and with
some material there will be little or no effect.
• The Late Night function is set to Off when the AV
receiver is set to Standby.
48
ON STANDBY
TV
I INPUT
V1 V2 V3
+
1 2 3
TV CH
MULTI CH DVD
4 5 6 -
CD TAPE TUNER
7 8 9
TV VOL
+ 10
0
CLEAR
10 11 12
- - / - - -
INPUT SELECTOR
MACRO
1 2 3
REMOTE MODE
RECEIVER DVD CD HDD
TAPE/AMP
TV VCR CABLE SAT
CDR MD
DIMMER SLEEP
+
CH
DISC ENTER VOL
ALBUM
-
PREV
CH
DISPLAY MUTING
REC PLAYLIST RANDOM
SP A SP B
LISTENING MODE
STEREO SURR
REPEAT AUDIO SUBTITLE PLAY MODE
DIRECT ALLST
TEST TONE CH SEL LEVEL LEVEL
OPEN/CLOSE VIDEO OFF
L NIGHT CINE FLTR
RC-632M
Off: Late Night function off.
Low: Small reduction in dynamic
range.
High: Big reduction in dynamic
range.

Using the CinemaFILTER

With the CinemaFILTER, you can soften overly bright
movie soundtracks, which are typically mixed for repro-
duction in a movie theater.
CinemaFILTER can be used with the following listening
modes: Dolby Digital, Dolby Digital EX, Dolby Pro
Logic II Movie, Dolby Pro Logic IIx Movie, DTS,
DTS-ES, DTS Neo:6 Cinema, DTS 96/24, DTS+Neo:6,
and DTS+Dolby EX.
1
RECEIVER
CINE FLTR
SETUP

Using the Audio Adjust Settings

The Audio Adjust settings only affect speaker set A.
1
CINE
FLTR
RECEIVER
L NIGHT
2
ENTER
ENTER
Press the [RECEIVER] REMOTE
MODE button, and then press the
[CINE FLTR] button repeatedly to
select:
On: CinemaFILTER on.
Off: CinemaFILTER off.
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
Use the Up and Down [ ]/[ ]
buttons to select "4. Audio
Adjust," and then press the
[ENTER] button.