Connecting A Recording Component; Connecting A Remote Interactive Dock (Ri Dock); Connecting A Dvd Player - Onkyo TX-8555 Instruction Manual

Connecting Your Components—Continued

Connecting a Recording Component

To connect recording components, such as cassette deck,
MD recorder and CD recorder, use an analog audio cable
to connect the receiver's TAPE IN L/R jacks to the
cassette deck's analog audio output jacks, and use
another analog audio cable to connect the receiver's
TAPE OUT L/R jacks to the cassette deck's analog audio
input jacks, as shown.
/
Connecting a Remote Interactive
Dock (RI Dock)
Use an analog audio cable to connect the TAPE IN L/R
or VCR/DVR IN L/R jacks to the RI Dock's analog
audio output jacks. Then use an
receiver's jack to the RI Dock's
When you change the input display name to "HDD," you
can operate the RI Dock using the remote controller
supplied with the receiver (see page 22).
Remote Interactive
Dock
Note:
Set the RI Dock's MODE switch to HDD or
HDD/DOCK.
Use an analog audio cable to connect the DVD IN L/R
jacks to the analog audio output jacks on the DVD
player, and use a video cable to connect the DVD IN V
jack to the composite video output jack on the DVD
player.
Then, connect the MONITOR OUT jack to a composite
video input jack on the TV.
You can select the video and sound from the DVD player
simultaneously by pressing the DVD input selector
button.
REC PLAY
(IN) (OUT)
cable to connect the
jack, as shown.
TAPE
AUDIO OUT

Connecting a DVD Player

MONITOR
OUT
V
VIDEO
IN
DVD
V
IN
L
R
DVD
L R
AUDIO VIDEO
OUT OUT
19