Monitor Out Setup - Onkyo TX-SR876 User Manual

First Time Setup—Continued

Monitor Out Setup

ON STANDBY
DVD VCR/DVR
1 2
GAME/TV AUX 1
4 5
TAPE TUNER
7 8
NET/USB
PHONO
+10
0
--/--- 10
INPUT SELECTOR
MACRO
1 2
REMOTE MODE
DVD VCR
TV CABLE
SAT
DIMMER
2, 3
+
CH
DISC
ALBUM
-
1, 6
PREV
CH
DISPLAY
REC PLAYLIST
SP A
LISTENING MODE
STEREO SURR
REPEAT AUDIO
PURE A DIRECT
If you connect your TV to the COMPONENT VIDEO
MONITOR OUT, set the "Monitor Out" setting to
"Analog" so that the onscreen setup menus are displayed
and composite video and S-Video sources are upcon-
verted and output by the COMPONENT VIDEO MON-
ITOR OUT.
If you connect your TV to the HDMI OUT MAIN or
HDMI OUT SUB, set the "Monitor Out" setting to
"HDMI Main" or "HDMI Sub", respectively, so that the
onscreen setup menus are displayed and composite
video, S-Video, and component video sources are
upconverted and output by the HDMI OUT MAIN or
HDMI OUT SUB.
You can specify the output resolution for the HDMI out-
puts and COMPONENT VIDEO MONITOR OUT and
have the AV receiver upconvert the picture resolution as
necessary to match the resolution supported by your TV.
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
TV
INPUT
CBL/SAT
+
3
TV CH
AUX 2
-
6
CD
9
TV VOL
D. TUN
CLEAR
11 12
3
ZONE 3
CD 2
ZONE
CDR/MD/DOCK
1
NET/USB RECEIVER
TAPE/AMP
SLEEP
2–5
VOL
ENTER
MUTING
RANDOM
SP B
SUBTITLE PLAY MODE
THX ALL ST
2
Use the Up and Down [q]/[w] but-
tons to select "1. Input/Output
Assign", and then press
[ENTER].
The "Input/Output Assign" menu
appears.
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
5. Analog Audio Input
3
Use the Up and Down [q]/[w] but-
tons to select "1. Monitor Out",
and then press [ENTER].
The "Monitor Out" menu appears.
1–1. Monitor Out
Monitor Out
Resolution
Brightness
Contrast
Hue
Saturation
MOVE
4
Use the Up and Down [q]/[w] but-
tons to select "Monitor Out", and
use the Left and Right [e]/[r]
buttons to select:
Analog:
Select this if your TV is connected
to the COMPONENT VIDEO
MONITOR OUT, S MONITOR
OUT, or V MONITOR OUT.
HDMI Main:
Select this if your TV is connected
to the HDMI OUT MAIN.
HDMI Sub:
Select this if your TV is connected
to the HDMI OUT SUB.
Note:
When "HDMI Main" or "HDMI Sub"
is selected, the onscreen setup menus
are output by only the HDMI outputs.
If you're not using the HDMI outputs
and select "HDMI Main" or "HDMI
Sub" by mistake and the menus dis-
appear, press the AV receiver's
[HDMI OUT] button so that "Moni-
tor Out: Analog" appears on the dis-
play.
Analog
Through
0
0
0
VALUE RETURN RETURN SETUP EXIT
55