Premaintenance Procedures; Releasing The Mower-Deck Curtain; Removing The Sheet-Metal Guard - Toro 74279TE Operator's Manual

Important: Refer to your engine owner's manual for additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug(s) before you do any
maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
Premaintenance
Procedures
Releasing the Mower-Deck
Curtain
Loosen the bottom bolt of the curtain to release the
mower-deck curtain and access the top of the mower deck
(Figure 30). Tighten the bolt after maintenance to install the
curtain.
1. Bolt
Figure 30
2. Curtain
Removing the Sheet-Metal
Guard
Loosen the 2 front bolts and remove the sheet-metal guard
to access the mower belts and spindles
sheet-metal guard and tighten the bolts after maintenance.
1. Sheet-metal guard
30
(Figure 31). Place the
Figure 31
2. Bolt