Maintenance; Recommended Maintenance Schedule(S) - Toro 74824 Operator's Manual

Zero-turn-radius riding mower
Table of Contents

Advertisement

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 50 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 500 hours
Monthly
Yearly or before storage
Important: Refer to your engine operator's manual for additional maintenance procedures.
If you leave the key in the ignition switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Maintenance Procedure
• Change the engine oil.
• Change the hydraulic system filter and oil.
• Check the safety interlock system.
• Check the engine oil level.
• Clean the air intake screen.
• Check the mower blades.
• Inspect the grass deflector for damage
• Clean the mower housing.
• Grease all lubrication points.
• Service the foam element. (more often in dusty, dirty conditions)
• Check tire pressure.
• Check the hydraulic oil level in the expansion tank.
• Inspect the belts for cracks and wear.
• Service the paper element. (more often in dusty, dirty conditions)
• Change the engine oil. (more often in dusty, dirty conditions)
• Check the spark plug(s).
• Replace the paper element. (more often in dusty, dirty conditions)
• Change the oil filter. (more often in dusty, dirty conditions)
• Change the hydraulic system filter and oil.
• Replace the fuel filters (more often under dusty, dirty conditions).
• Check the battery charge.
• Paint chipped surfaces.
• Check all maintenance procedures listed above before storage.
28

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Titan zx6050

Table of Contents