Operating The Mower Blade Control Switch (Pto); Stopping The Engine - Toro 74824 Operator's Manual

Note: Additional starting cycles may be required
when starting the engine for the first time after the
fuel system has been without fuel completely.
Figure 17
1. Off
2. Run

Stopping the Engine

Children or bystanders may be injured if they
move or attempt to operate the tractor while it
is unattended.
Always remove the ignition key and set the
parking brake when leaving the machine
unattended, even if just for a few minutes.
G008947
3. Start
1
3
5
Operating the Mower Blade
Control Switch (PTO)
The blade control switch (PTO) starts and stops the
mower blades and any powered attachments.
Engaging the Blade Control Switch
(PTO)
Note: Engaging the blade control switch (PTO) with
the throttle position at half or less will cause excessive
wear to the drive belts.
19
2
4
G010081
Figure 18
G008945
Figure 19