Operating The Parking Brake - Toro 74266 Operator's Manual

1. Safe Zone-use the
Z Master here on slopes
less than 15 degrees or
flat areas.
2. Use walk behind mower
and/or hand trimmer near
drop-offs and water.
CAUTION
This machine produces sound levels in excess of
85 dBA at the operators ear and can cause hearing
loss through extended periods of exposure.
Wear hearing protection when operating this
machine.
The use of protective equipment for eyes, ears, feet and head
is recommended.
1. Warning— wear hearing protection
Figure 10
3. Water
Figure 11

Operating the Parking Brake

Always set the parking brake when you stop the machine or
leave it unattended.
Setting the Parking Brake
1. Move the motion control levers (Figure 18) out to the
neutral lock position.
2. Pull up and back on the parking brake lever to set the
parking brake (Figure 12). The parking brake lever
should stay firmly in the engaged position.
WARNING
Parking brake may not hold machine parked
on a slope and could cause personal injury or
property damage.
Do not park on slopes unless wheels are
chocked or blocked
Releasing the Parking Brake
Push forward and down on the parking brake lever to
release the parking brake (Figure 12). The parking brake is
disengaged and the lever will rest against the brake stop.
1. Parking brake-ON
2. Parking brake-OFF
19
Figure 12
3. Brake Stop