Shutting Off The Machine; Operating The Parking Brake - Toro eTimeCutter eMR4275 Operator's Manual

Zero turn riding mower

Table of Contents

Shutting Off the Machine

Children or bystanders may be injured if they move or attempt to operate the machine

while it is unattended.

Always remove the key and engage the parking brake when leaving the machine

unattended.

1. Park the machine on a level surface.

2. Disengage the blade-control switch (PTO).

3. Move the motion-control levers outward to the N

4. Engage the parking brake.

5. Turn the key switch to the O

6. Wait for all moving parts to stop before leaving the operating position.

Whenever you shut off the machine, engage the parking brake to prevent accidental

movement of the machine.

• To engage the parking brake, use your foot to push down the parking-brake pedal

and move it left into the detent.

• To disengage the parking brake, use your foot to push down the pedal, move the

parking-brake pedal to the right out of the detent, and slowly release it.

You can use the parking brake to stop the machine in emergency situations or when a

machine fault disables the traction controls.

3445-793A

CAUTION

EUTRAL

position and remove the key.

G428514

Page 4–10

position.

LOCK

Operation: During Operation

Table of Contents

75642