To Cancel A Timer Recording In Progress; Check, Change, Delete Programmes, Or Resolve Overlapping - Panasonic Diga DMR-EX98VEB Operating Instructions Manual

– You cannot change Name, Date and Start/Stop.
– This unit automatically records the
programmes that are identified to be of the
same series by the GUIDE Plus+ data.
– Titles recorded using series recording are
bundled and displayed as a "group" in the
Direct Navigator screen (➔ 40) except when
using Auto Renewal Recording.
Series recording icon
Tips
To check the schedule of the series
Press the "blue" button after performing steps 1–2 (➔ 22).
Series Information
Fri 10/10/08 10:35
Name Date Contents
Wed 12/05 Decameron 1
S
BBC2
21:30-22:30
Wed 12/12 Decameron 2
S
BBC2
21:30-22:30
Wed 12/19 Decameron 3
S
BBC2
21:30-22:30
Wed 12/26 Decameron 4
S BBC2
21:30-22:30
Wed 1/2 Decameron 1
BBC2
21:30-22:30
S : The episode to be recorded
: Repeat programme
R
Notes
• If the unit cannot record the first run, the unit will record the repeat
programme if it is available. However, this unit will not record the
repeat programme, if any part of the first run is recorded.
• The series recording will be cancelled if there has been no episode
of the series for 13 weeks.

To cancel a timer recording in progress

HDD RAM -R -RW(V) +R +RW VHS
While the unit is on
– Confirmation screen appears.
w to select "Stop Recording",
then
Notes
Recording stops and the timer programme is deleted. (Daily and
weekly timer programmes remain and timer recording will start from
the next time the timer recording is set.)
Downloaded From Disc-Player.com Panasonic Manuals
R
Check, Change, Delete Programmes, or
Resolve Overlapping
HDD RAM -R -RW(V) +R +RW VHS
The timer recording list can be viewed even when the
unit is off.
, then e, r to select the
programme.
Timer
Remain HDD 30:24 SP
Recording
VHS 1:59 SP FRI 10/10/08 12:54:00
No. Name Date Start Stop Drive
A
New Timer Programme
C
Press OK to store new programme.
OK
RETURN
Timer Recording screen icons
A
z : Timer programme is active.
: Currently recording
*
: Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
finishes recording.
: You stopped a weekly or daily timer recording. The icon
Q
disappears when the next timer recording starts.
: The disc was full. (not enough space)
: The TV programme may not be recorded due to copy-protect.
: Recording stopped (Dirty disc, etc.)
X
: Timer programmes set to Auto Renewal Recording
(➔ 36).
: Titles that have been rerouted to the HDD
(Displayed while recording.)
Drive Recording drive is set to HDD, DVD or VHS
Drive space
B
OK: Recordable
HDD DVD
➔
(Date): For recordings made daily or weekly, the display will show
until when recordings can be made (up to one month
ahead from the present time) based on the time remaining
on the disc.
HDD DVD
!:
It may not be possible to record because:
– The disc is write-protected.
– There is no more space left.
– The number of possible titles has reached its maximum.
HDD DVD
– The new timer recording will completely or partially
record over this timer recording.
– –: When the drive is set to VHS, "––" is displayed.
Relief: Timer programmes that will be relief recorded to the HDD.
DVD
Channel name, programme name and other information are
C
displayed.
(Continued on the next page)
1:58 SP
DVD
Drive
Mode STTL space
B
DVD
HDD DVD
RQT9089
35