Know Your Unit; Unit Overview - Omron GO SMART HJ-203 Instruction Manual

kNOW yOUR UNIT

Front of unit
Display
▼/MEMO (memory)
button
Back of unit
SET button
Components
How to How to
attach the connect the
strap to the strap and
main unit the clip
Create a
loop to
attach
the strap
NOTe:
Clothing may be damaged if you pull the unit off
without opening the clip
Low battery
indicator
▲/MODE button
/ACTION button
Strap
Clip
Battery cover
Battery cover
screw
Strap attachment
How to release
and fasten with a
clip
To release
To fasten

SeTTINGS
The unit comes with the battery installed When you
use the unit for the first time or you want to change
settings, follow the steps below For setting range
details refer to "Specifications" on page 24.
. Press the SeT button on the
back of the unit with a thin,
sturdy, stick that will not
break easily.
Do not press the SET button
with a sharp point This could cause damage
The following display (HELLO) will appear
NOTe:
The display will turn off if no buttons are
pressed after 5 minutes while setting the unit
for the first time or after resetting the unit.
When resetting the unit, the display will show
the current step count
2. Setting the hour.
Press
desired value for a setting
Press
• Press ( ) to advance (go back) one
or to select the
to confirm the setting.