Reading The Current Display; Activity Tracker - Omron GO SMART HJ-203 Instruction Manual

ReAdING THe CURReNT dISPLAy

Press to change the display
About the battery saving mode (sleep mode)
After 5 minutes with no button being pressed, the
message "sleep" appears, then the display will
automatically turn off However, the unit continues
counting steps This mode extends the battery life
Press , or to activate the display again
Step count display
Displays the symbol
when you reach 10,000
steps for a day
distance display
Calories display
Fat burned display
Time display


ACTIvITy TRACkeR

NOTe:
You cannot check the current display or memory
function when using activity measurement mode
. Press for two seconds to start the
activity measurement mode.
rotates on the bottom
left side on display when
the activity measurement
mode is on
2. Start exercising.
The display changes with each press of
to display the step count, distance, calories
burned, fat burned, and the time, in that order
3. Press for two seconds to finish.
Press to view the measurement results after
activity measurement mode has finished (refer to
page 18)
NOTe:
Only one session can be stored in memory for
activity measurement mode The measurement
values for the previous session will be deleted
Make a note of them before starting the new
session if necessary