Motorola AP-7562 Installation Manual page 40

40
14. Select Apply to commit the updates to the selected Access Point's configuration.
15. Expand the Configuration menu item and select Wireless.
The Wireless screen displays fields where Radio Settings and Wireless LAN settings can be defined. Its
recommended default radio settings remain as is for the Access Point's basic setup.
In respect to the Radio Settings, the professional installer should be aware of the following:
NOTE
• The Channels available for configuration are channels for which the product is approved in its
selected country. The professional installer must ensure the product is set to operate under
conditions, and on channels, approved by country regulations.
• Selecting Smart as the Power setting automatically configures radio power to not exceed the
maximum power allowed by the defined country. For static power settings, the professional installer
must ensure the configured power levels are compliant with local and regional regulations. The
county selected automatically limits the maximum output power that can be set.
• For external antenna Access Points, configure the Antenna Gain based on the antenna used in the
deployment. The set gain value should include the antenna gain, along with any additional
components, such as extension cables used between the Access Point and the antenna.
In respect to Wireless LAN settings, at minimum, a WLAN should be created providing some measure
of security.
The above example includes a field for setting the antenna gain. This
setting is only available for external antenna Access Points and does not
display for internal antenna Access Points.
AP-7562 Access Point