Flicker Adjustment; Illumination Adjustment - Kenwood DDX6034 Service Manual

3. Flicker adjustment

• Input signal
No signal
• Adjustment & Inspection method
Test mode is started.
<1> It is touches in order "fl icker" of the screen.
<2> Touch display and move up/down so that fl icker am-
plitude may become the minimum.
<3> Touch "OK" area.
<4> Adjustment result is confirmed. (Display to "Write
OK").
It is touches in order "Return" of the screen.
LCD Adjust
ALL Auto
W.B.Auto
VCOM Auto
<1>
<2> <3>
Flicker Adjust
Write OK
<4>
ADJUSTMENT
Flicker
AGC Auto
HPOSI Auto
Return
Adjust
Return
DDX6034/6034M/6054/7034BT/7034BTM/714
DNX7000EX/7140/7240BT/7340BT

4. Illumination adjustment

• Input signal
No signal
• Adjustment & Inspection method
Test mode is started. It is touches in order "Illumi" of the
screen.
Picture q for LED_WB adjustment is displayed.
Decides from four lines of Red/Green/Blue/Yellow wheth-
er you became the color what color of the LED of the
panel right side- similar sample set white.
Confi rm that LED whitened and push NEXT_KEY.
Test Mode Main
Information Touch
Service
Ext SW
Direct Select Tilt Mecha
LED adjust area
LCD Adjust
Illumi PWR FRQ
iPod Navigation
Bluetooth
27