Advertisement
4.1
TEST MODE
4.1.1 Panel
*[RESET] button is mounted on the sub panel section.
„How to transfer into the test mode
Reset operation by pressing [iPod] key and [TEL] key simultaneously.
*Reset can be made also by turning on the head unit power supply.
„How to clear the test mode
It is required to clear the test mode under any of the following conditions:
• Reset
• Momentary power down detection
• ACC OFF operation
• POWER OFF operation
• Panel detach operation
„Initial setting
• The source when making the transfer shall be STANDBY source.
• Set SRC Select to Setting 1. (Same as normal)
• All the LCDs shall be turned on.
• VOLUME setting shall be 33.
• KEY ON BEEP setting shall be ON regardless of destination. (Enable STANDBY source too)
• Build-in AUX shall be ON.
• DISPLAY setting shall be 5-line display mode, STATUS setting shall be OFF, and SIDE setting shall be TAG.
• DISPLAY TEXT setting in TUNER source shall be as follows:
M type 1st row: Frequency
• DISPLAY TEXT setting in CD/USB source shall be as follows:
1st row: P-TIME
• In every source, DISPLAY TEXT setting in 4th and 5th row shall be as follows:
4th row: Date
5th row: Spectrum analyzer/ Clock (In some sources, setting shall be Clock only)
• The illumi settings shall be R255, G255, and B255 (white).
• Stop the motor of mechanism without rotating when it goes into the test mode without a DISC inserted.
SECTION 4
ADJUSTMENT
Rotary
DISP
Audio
iPod
(No.WA020<Rev.001>)11/24
PRESET
TEL
Advertisement
