Udp Send Request - Omron CJ1W-ETN11 Operation Manual

Sysmac cs/cj series ethernet units
Hide thumbs Also See for CJ1W-ETN11:
Table of Contents

Advertisement

Command/Response Reference
Number of Reception
Bytes (Command, Results
Storage Area)
Timeout Value (Command)
Source IP Address
(Results Storage Area)
Source UDP Port Number
(Results Storage Area)
Received Data (Results
Storage Area)
Precautions
Response Codes
Results Storage Area Response Codes

11-3-11 UDP SEND REQUEST

The maximum number of bytes of data to be received is given in the com-
mand. The number of bytes of data received will be stored in the results stor-
age area. Up to 1,984 bytes can be specified.
The maximum control time between receiving the receive request and storing
the result. If this set time limit is exceeded, the code for a timeout error will be
set as the results storage response code. The value is set in units of 0.1 s.
The timeout time will be unlimited if the value is set to 0.
The IP address of the node sending data.
The port number of the node sending data.
The data sent from the remote node.
If a packet is received which contains more bytes than the number specified in
Number of reception bytes specified in the command, the specified number of
bytes will be stored and the remainder of the bytes will be discarded.
Response code
0000
Normal
0105
IP address setting error
0302
CPU Unit error; execution not possible.
1001
Command too large
1002
Command too small
1100
UDP socket number or number of reception bytes is out of
range.
1101
The variable type for the results storage area is out of range.
1103
Non-zero bit address specified for the results storage area.
220F
The specified socket is currently receiving data.
2210
The specified socket is not open.
2211
High traffic at Unit; cannot execute service.
Response
code
0000
Normal
003E
Internal buffer cannot be reserved due to high reception load
(ENOBUFS).
0066
Internal memory cannot be allocated; cannot execute service.
0080
A receive request timeout error occurred.
0081
The specified socket was closed while receiving data.
Requests that data be received by a UDP socket.
Section 11-3
Description
Description
225

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs1w-etn11Cs/cj seriesCs1w-etn01W343-e1-07

Table of Contents