Changing The Engine Oil Filter - Toro 74915 Z Master G3 Operator's Manual

5. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil
to bring it to the Full mark (Figure 49).
1
3
5
6. Start the engine and drive to a flat area. Check the
oil level again.

Changing the Engine Oil Filter

Service Interval: Every 200 hours
Note: Change the engine oil filter more frequently
when operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to Changing the
Engine Oil.
2. Change the engine oil filter (Figure 50).
2
4
6
G008796
Figure 49
1
3
5
Note: Ensure the oil filter gasket touches the engine
and then an extra 3/4 turn is completed.
3. Fill the crankcase with the proper type of new oil;
refer to Changing the Oil.
36
2
4
6
3/4
Figure 50
G008804
G008748