ELECTRICAL SYSTEM
Changing the parking light bulb
13.6
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Attach retaining clamp
–
Connect plug-in connection
–
Mount rubber cap
B00760-10
–
Fold the headlight mask up.
–
Mount and tighten screws
Guideline
Screw, headlight mask
–
Mount expanding rivets
–
Check that the lighting is functioning properly.
B00759-10
.
.
.
.
M6
on both sides.
103
14 Nm
(10.3 lbf ft)