WHEELS, TIRES
Checking the rear hub rubber dampers
12.5
Info
The engine power is transmitted from the rear sprocket to the rear wheel via 6 rubber dampers. They eventually wear out during
operation. If the rubber dampers are not changed in time, the rear sprocket carrier and the rear hub will be damaged.
–
Pull the rear wheel back and mount wheel spindle
Info
Mount the left and right chain adjusters
–
Mount nut
–
Push the rear wheel forward so that the chain adjusters are on the screws, and tighten
nut
.
Guideline
In order for the rear wheel to be correctly aligned, the markings on the left and right
chain adjusters must be in the same position relative to the reference marks
Nut, rear wheel spindle
–
Take the motorcycle off of the rear wheel stand. (
B00745-11
x
–
Remove the rear wheel.
and washer.
x
(
p. 88)
.
in the same position.
M14x1.5
60 Nm
(44.3 lbf ft)
p. 66)
90
.