KTM 125 Duke Owner's Manual page 124

SERVICE WORK ON THE ENGINE
–
Insert oil filter
–
Oil the O-ring of the oil filter cover. Mount oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
Info
Too little engine oil or poor-quality engine oil results in premature wear to the
B00776-10
engine.
–
Remove the oil filler plug
engine oil.
Engine oil
–
Install and tighten the oil filler plug with O-ring.
B00773-11
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
–
Start the engine and check that it is oil-tight.
–
Fit the front spoiler. (
.

M5
with the O-ring from the clutch cover and fill up with

1.50 l (1.59 qt.)
p. 76)
.

12 Nm Loctite ®
(8.9 lbf ft)
External temper- Engine oil
ature: 0... 50 °C (SAE 15W/50)
(32... 122 °F) ( p. 146)
External tempera- Engine oil
ture: −10... 40 °C
(SAE 10W/40)
(14... 104 °F) ( p. 146)
122
243™