Cleaning The Dust Boots Of The Fork Legs - KTM 990 Adventure Baja Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.4

Cleaning the dust boots of the fork legs

Main work
–
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
Info
Carry out this operation on both fork legs.
100536-10
Preparatory work
–
Raise the vehicle using the center stand. (
Main work
–
Push dust boot
Info
The dust boots should remove dust and coarse dirt particles from the fork tubes.
Over time, dirt can penetrate behind the dust boots. If this dirt is not removed,
the oil seals behind can start to leak.
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the
B01365-10
brake discs.
–
–
Clean and oil the dust boots and inner fork tube of both fork legs.
.
1
of both fork legs downwards.
1
Always keep the brake discs free of oil and grease, and clean them with
brake cleaner when necessary.
p. 86)
88