13
WHEELS, TIRES
Preparatory work
–
Raise the vehicle using the center stand. (
–
Remove the rear wheel.
Main work
–
Check the rubber dampers
»
If the rubber dampers of the rear hub are damaged or worn:
–
Change all rubber dampers in the rear hub.
100572-10
–
Lay the rear wheel on a workbench with the rear sprocket facing upwards and insert the
wheel spindle in the hub.
–
To check the play
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel
»
If clearance
B01378-10
–
Change all rubber dampers in the rear hub.
Finishing work
–
Install the rear wheel.
–
Raise the vehicle off of the center stand. (
x
(
p. 123)
of the rear hub for damage and wear.
1
, hold the rear wheel tight and try to rotate the rear sprocket.
A
larger than the specified value:
A
x
(
p. 125)
p. 86)
≤ 5 mm (≤ 0.2 in)
p. 87)
127