14
ELECTRICAL SYSTEM
14.10
Changing the turn signal bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Main work
–
Remove rubber cap
–
Pull socket
–
Insert the new bulb into the socket and insert the socket into the headlight.
Parking light (W5W / socket W2.1x9.5d) (
–
Replace the rubber cap.
100638-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Install the front side cover. (
–
Check the headlight setting. (
.
1
out of the headlight and pull bulb
2
p. 90)
p. 148)
out of the socket.
3
p. 202)
p. 141)
144