KTM 990 Adventure Baja Owner's Manual page 149

14 ELECTRICAL SYSTEM
–
Remove nuts
rear.
100599-10
–
Turn bulb socket
–
Press bulb
it out of the socket.
–
Press the new bulb carefully into the socket and turn it clockwise until it stops.
Brake light (P21W / socket BA15s) (
–
Insert the bulb socket into the tail light and turn clockwise until it stops.
–
Check the lighting function.
–
Position the tail light. Mount and tighten nuts with the washers.
100651-10
Guideline
Nut, tail light
at the bottom of the rear fender and pull out the tail light toward the
1
counterclockwise all the way and take it out of the tail light.
2
carefully into the socket, turn it counterclockwise by about 30°, and pull
3
p. 202)
M6 8 Nm (5.9 lbf ft)
147