KTM 990 Adventure Baja Owner's Manual page 109

11 SERVICE WORK ON THE CHASSIS
–
Check the chain sliding guard for wear.
» If the chain sliding guard is worn:
–
Change the chain sliding guard.
–
Check the chain sliding guard for tightness.
» If the chain sliding guard is loose:
–
Fully tighten the chain sliding guard.
Guideline
Screw, chain sliding
B00113-01
guard
–
Check the chain guide for wear.
» If the chain guide is worn:
–
Change the chain guide.
–
Check the chain guide for tightness.
» If the chain guide is loose:
–
Fully tighten the chain guide.
Guideline
Screw, chain guide
B00114-01
Finishing work
–
Raise the vehicle off of the center stand. (
x
M6 6 Nm
(4.4 lbf ft)
x
M6 6 Nm
(4.4 lbf ft)
p. 87)
107
Loctite ® 243™
Loctite 243™
®