Refitting Of The Fc Drawer - Fisher & Paykel RF201A Service Manual

819091D
Push Locking Tab in to release bracket from slide.

12.4.14 Refitting Of The FC Drawer

1. There are two locating tabs on the drawer that are required to be fitted first. (Refer Photo 0)
Step 1
2. Align the rear locating tab into the slot as shown in step 1.
3. Align the front locating tab into the slot as shown in step 2.
4. Fit the anti-wracking bar into the wracking pinion gear ready to fit to the drawer.
5. Both anti-wracking pinion gears need to be fitted simultaneously. (If this is not achieved, damage
to the gearing may occur or the drawer will not close correctly.) Refer Photo 12.4.10.1
Photo 12.1.10.1
6. Place the anti-wracking pinion on an angle and slide both pinion gears into position on the slide.
7. Fit the locking tab into position as shown in Photo 12.4.10.2
Locking Tab
Step 2
Photo 12.4.10.2
56