To Manually Force The Icemaker; Data Download - Fisher & Paykel RF201A Service Manual

819091D
However, if the door is left open for 5 minutes, the interior light will turn off and the alarm will sound. At this
point the display will start working and all functions will be operative.
9.4

TO MANUALLY FORCE THE ICEMAKER

(Products before January 2009)
Press and hold down the MEASURED FILL + UP + DOWN buttons for 4 seconds. This will activate the
icemaker. Note: if the bins are removed to observe the icemaker operation, the icemaker will start to rotate.
However, if the bin lever device is in a down position the icemaker will not rotate. The lever-lock needs to be
either removed or pushed backwards for the icemaker to complete a full rotation.
(Products after January 2009)
Press LOCK key first, then DOWN + UP keys and hold all three (3) keys for 4 seconds. This will activate the
icemaker. Note: if the bins are removed to observe the icemaker operation, the icemaker will start to rotate.
However, if the bin lever device is in a down position the icemaker will not rotate. The lever-lock needs to be
either removed or pushed backwards for the icemaker to complete a full rotation.
NOTE: A forced harvest will operate without the product being down to temperature. If the harvest does not
work the sensor may be not connected or open circuit. The Icemaker sensor must be in circuit for a forced
harvest to work.
9.5

DATA DOWNLOAD

To place the product into download mode, press and hold the MENU button, then press the UP button for four
seconds, then press the DOWN button.
Once the product is in a download mode, either of the LEDs can be used. Place the download pen towards
the LEDs and start the download. The display will have the letters "dl", signifying product is in a download
mode.
Diagram H
Bin lever in down position.
position, the icemaker will not rotate/harvest.
44
When in this