KTM 1190 RC8 R USA Owner's Manual page 98

6 CONTROLS
–
Press the button
–
Press the button
–
Press the MODE button briefly.
–
Press the MODE button briefly.
RPM1 and RPM2 appear on the info display.
The engine speed after RPM1 flashes.
Info
The engine speed can be set at intervals of 50.
400460-01
RPM1 is the engine speed above which the shift warning light starts to flash.
–
Set the engine speed with the button
–
Press the MODE button briefly.
The engine speed after RPM2 flashes.
Info
RPM2 is the engine speed above which the shift warning light lights up con-
stantly. If RPM1 = RPM2, the shift warning light lights up constantly when you
reach the engine speed set.
–
Set the engine speed with the button
–
Press the MODE button briefly.
The settings are stored and the display switches to the SETTINGS menu.
Info
At delivery, RPM1 is set to 10000 and RPM2 to 10500.
–
Press the button
display.
and the button for 3 - 5 seconds.
shows SETTINGS in the info display.
twice until the symbol
or the button
or the button
briefly and repeatedly until the symbol
.
.
shows BACK... in the info
96