Connection Procedure; Showing Monitor Information; Displaying Signal Information - Eizo ColorEdge CS270 User Manual

●

Connection Procedure

1. Connect the signal cable between a PC and the monitor, and turn on the PC.
2. Using the USB cable, connect the computer's downstream port and the monitor's upstream port 1.
3. Connect the peripheral USB device to the USB downstream port of the monitor.
Note
• By default, USB upstream port 1 is enabled. To connect two PCs, see
33).

7-5. Showing Monitor Information

●

Displaying signal information

This function displays the information about the current input signals displayed.
Procedure
1. Choose "Tools" from the Adjustment menu, and press
2. Choose "Signal Info" from "Tools", and press
The "Signal Info" appears.
Example:
"4-4. Switching USB Port Automatically" (page
USB
USB
upstream downstream
port
port
.
.
45
Chapter 7 Reference